epoxy FLO-ROC 5 UCAN

$55.99

UCAN FLO-ROK FR5 MAX is a styrene free epoxy acrylate adhesive suitable for year-round use without preconditioning in temperature ranging from -20C to over 30C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener.
UCAN FLO-ROKTM FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ‘c , of 2,500 psi to 8,500 psi (17.2 Mpa to 58.6 Mpa).  
The FLO-ROKTM FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.
TYPICAL APPLICATIONS:
  • Rebar dowelling
  • Highway and bridge construction
  • Machine, crane and hoist installation
  • Hollow wall anchoring applications
  • Renovations
SKU: 5 Categories: , , ,

Description

UCAN FLO-ROK FR5 MAX is a styrene free epoxy acrylate adhesive suitable for year-round use without preconditioning in temperature ranging from -20C to over 30C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener.
UCAN FLO-ROKTM FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ‘c , of 2,500 psi to 8,500 psi (17.2 Mpa to 58.6 Mpa).  
The FLO-ROKTM FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.
TYPICAL APPLICATIONS:
  • Rebar dowelling
  • Highway and bridge construction
  • Machine, crane and hoist installation
  • Hollow wall anchoring applications
  • Renovations

 

  • IAPMO – ES listing pending
  • ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
  • Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature
  • Seismic resistance
  • User friendly, low odour, styrene free & MMA free
  • Meets LEED guidelines; low VOC
  • Moisture insensitive, non sag formula
  • Suitable for damp and water filled holes
  • Shelf life 1 year, store cartridge at +5C to +25C before use
  • Meets CSA A23.3-14, Annex D requirements
  • Size – 28oz

Additional information

Weight 1.5 kg
Dimensions 30 × 18 × 18 cm

Related products